Equipment parts / Lubricants / Maintenance
Brake fluid DOT4 0,5l
Brake fluid DOT4
bottle with 0,5 liters
liter= € 21,10
Image similar!
gemäß GPSR: Dieser Artikel kann gesundheitliche Beeinträchtigungen hervorrufen
according to GPSR: This product may cause health problems
Art.No.: 81.22.114
Brake cleaner 500ml
500ml Spray
(1 Liter =€9,00)
gemäß GPSR: Dieser Artikel kann gesundheitliche Beeinträchtigungen hervorrufen
according to GPSR: This product may cause health problems
Art.No.: 81.22.116
Brake fluid DOT4 0,25l
Brake fluid DOT4
bottle with 0,25 liters
(1l=€29,20)
gemäß GPSR: Dieser Artikel kann gesundheitliche Beeinträchtigungen hervorrufen
according to GPSR: This product may cause health problems
Art.No.: 81.22.115
Disk brake kit 320mm with adaptor, R80/100GS+PD Paralever and R80GS Basic
Disk brake conversion kit 320mm
For R80GS R100GS, GS-PD Paralever and R80GS Basic
brake disc with 4 holes
Disk brake kit with adaptor for R80/100GS paralever (new brake tube required) and ABE, for much better brake power an better heat abstraction.
If needed please order stainless steel brakeline
For GS to 90: 3432799
For GS PD to 90: 3432107
For GS + PD after 91 + R 80 GS Basic : 3432687
Art.No.: 34.10.490
Brake hose holder with rubber grommet, BMW R45 R65 R80ST and universal
Brake hose holder with rubber grommet below
For BMW R45 R65 R65LS R80ST and universal
For comparison 34321237255/34321237259
Art.No.: 34.32.255
Valve Extension, universal, BMW R2V K, R4V, F,
Valve Extension, universal
BMW R50/5 R60/5 R75/5 R60/6 R75/6 R90/6 R90S R60/7 R75/7 R80/7 R80RT R80R100/7 R100S R100RS R100RT R100CS R45 R65 R65LS R80G/S R80ST R65GS Paralever models R80GS R100GS R80GS PD R100GS PD R80R R100R R100R Mystik R80GS Basic Monolever models R65 R80 R80RT R100RS R100RT BMW K100 K100/2 K100RS K100RT K100LT K75 K75C K75/2 K75S K75RT K1 K100RS16V K1100LT K1100RS K1200RS K1200GT K1200LT BMW R850R R850GS R850RT R1100GS R1100RS R1100R R1100RT R1100S R1150GS R1150R R1150RS R1150RT R1200C R1200CL..
Art.No.: 71.99.172
Footrest lowering set with gear change lever, stainless steel
Lowered stainless steel Footpegs R80/100GS
30mm lower and more forward this set gives you a more comfortable riding position
TÜV approved - with short gear change lever
Art.No.: 46.99.010
Luggage/Topcase Rack R80/100 GS black
- Recommended load: Topcase + approx. 5kg load capacity
- Please refer to the specific model of the motorcycle manufacturer, as well as the instructions on the installation manual or here on the product
- Incl. Installation material and instruction
not for R80GS Basic
Fits all Hepco Becker Topcases
(See item no.: 6102171, 6102120)
Art.No.: 65.06.081
Toolbag made of nappa leather.
Delivery is done WITHOUT tools
Art.No.: 71.99.802
Battery Charger JMP Skan 8.0
Battery charger and trickle charger 2-8 Amps charging
Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging levels.
Both for fast charging of a battery and for long-term maintenance charging, e.g. when vehicles are wintered.
Suitable for:
• Standard lead acid
• gel
• AGM
• EFB
• Lithium (LiFePO4)
Technical specifications:
• 12 V / 2-8 A Charging
• for batteries from 5 Ah to 160AH
• Low voltage detection: 0.7V
• Overcharge protection, reverse polarity protection
• Splashproof and dustproof (IP65)
• Dimensions: 230x100x65mm
• Weight: 1,0kg
• Power cord: 2 m
• Connection cable: 2.10 m
Scope of delivery:
• JMP Skan 8.0
• Adapter cable with clamps
• Adapter cable with ring eyelets for permanent connection to the battery
• Adapter cable for on-board socket (CAN bus)
Picture similar !
gemäß GPSR: Dieser Artikel kann gesundheitliche Beeinträchtigungen hervorrufen
according to GPSR: This product may cause health problems
Art.No.: 63.21.076
Battery Charger JMP Skan 4.0
Battery charger and trickle charger
Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging levels.
Both for fast charging of a battery and for long-term maintenance charging, e.g. when vehicles are wintered.
Suitable for:
• Standard lead acid
• gel
• AGM
• EFB
• Lithium (LiFePO4)
Technical specifications:
• 12 V / 1 - 4 A
• for batteries from 4 Ah to 120AH
• Low voltage detection: 0.7V
• Overcharge protection, reverse polarity protection
• Splashproof and dustproof (IP65)
• Dimensions: 190 x 80 x 50 mm
• Weight: 0.75 kg
• Power cord: 2 m
• Connection cable: 2.10 m
Scope of delivery:
• JMP Skan 4.0
• Adapter cable with clamps
• Adapter cable with ring eyelets for permanent connection to the battery
• Adapter cable for on-board socket (CAN bus)
Art.No.: 63.21.075
Universal plug
with the cap removed (bayonet) board sockets.
With screw and solder connection.
Art.No.: 61.99.944
Plug
DIN charging plug with screw connection, for onboard charging
A stable universal DIN plug with removable outer housing (without tools). to unscrew
The cable receptacles are screwed and do not need to be soldered
For socket outlets according to DIN ISO4165 (eg BMW socket)
Schaub connections
Art.No.: 61.99.106
USB Charger
USB Charger
USB10
This USB charging plug can be used in various on-board sockets 12/24V and converts to the USB standard 5V on 2 USB sockets. USB-A and USB-C with max. 3.6A each.
It fits not only in conventional cigarette sockets, but by removing the red cap (bayonet lock), also in small DIN sockets or vehicle manufacturer sockets (eg BMW).
Due to the angled shape, it can also be used in side-mounted on-board sockets while driving.
- Universal plug for DIN and ZIG sockets
- Practical angular shape
- 3,6A USB-A and USB-C output
- With splash protection cover
Art.No.: 61.99.053
Plastic cap for M6 Nut, white, hex, BMW R2V R4V, K and F Models
Plastic cap, white, hex
for M6 Nut
For all BMW R2V, R4V, K, F models and universal
Art.No.: 73.00.011
